Hi,
We have two SAN members in a group which I have recently upgraded the firmware. SAN01 went through fine but SAN02 hit an issue saying it wasn't compatible with the 64 bit version when I previously updated using 64 bit firmware.
The restart would take place and the status would show "in progress" but the progress bar would stick at 0%. The only way to recover from this would be to power down the unit and back on.
The status for the controllers showed no issues and both control modules had the updated firmware V7.1.2 (R402088).
I was curious to see if there was an issue with this unit still so I restarted the unit from the maintenance tab and exactly the same thing would happen. Trying this on SAN01 would take a few minutes.
Does it seem likely that one of the controller units is faulty? Is there a way to list any errors through a CLI command using telnet/SSH?
So long as we don't ever need to restart the controllers everything seems fine. All the datastores are present and I can find no errors going through EqualLogic Group Manager. We no longer have maintenance so I am no longer able to download and update the firmware.
Any help would be appreciated.