Hi,
Our systems were designed and built by a dell partner but I've been unable to find articles online that backup their design.
6xR810 with 8 network ports
2xPC6248 switches
EQL PS6500X fully populated 8 network ports connected (4 active)
The R610 servers are running 2012 R2 and have two teams configured using inbuilt teaming with 4 nics assigned to each team.
- 'Team 1' which has all the virtual NICs connected and is using LACP.
- 'iSCSI Team' set to switch Independent.
When I look at the adaptor usage it looks like only 1 of the 4 NICs is taking all the traffic with the rest practically idle.
I know that as of 2012 R2 teaming is supported for iSCSI but is this configuration correct in this case?
Thanks