Is VSM 4.6.0 supported on vSphere 6.5?
I understand MEM 1.4 is fully supported on vSphere 6.5 (confirmed by Donald in an earlier thread). Does the same apply to VSM 4.6.0?Thanks.
View ArticleVSM support for vSphere 6.5?
Now that vSphere 6.5 is out, is there an ETA on an updated VSM that is supported/compatible with it?It seems that we have to wait to upgrade till then since we're using VVOLs. :)
View ArticleHIT and VSM for Vmware
Where can I find Vasa Provider for equalogik PS series for VMware 6-6.5 (HIT Vmware).At http://eqlsupport.dell.com I see HIT/VMware Version 3.1.2 for vCenter 4.1 and 5.And VSM/VMware® Version 4.6.0...
View ArticleEquaLogic Volume Provisioning
I created an 800 GB Volume and have it connected to one of 3 ESXi Host. I did not create it as thin provisioned. Also, Not using snapshots (i set this to 0) at this time.If I wanted to go back and...
View ArticleMEM 1.4 on ESXi 6.5
I configured then installed MEM 1.4 on ESXi 6.5 fine (using hardware offload on nics). After using the setup.pl script I noticed iSCSI was not enabled on ESXi and MTU, delayed ack, login timeout were...
View ArticleMove Volume from One Group to Another
Is there a way to manually move a volume from one storage group to another? I have a few volumes in a storage group that I need to move to a new storage group with a new array so that I don't have to...
View ArticleEqualLogic SMP Storage Provider support for SCVMM 2016
Hi thereI'd like to get a little more information surrounding the SMP provider that comes shipped with HIT Kit 5.0, specifically, whether this will work with SCVMM 2016.We can see in the documentation...
View ArticleHow do I Uninitialize the PS4210
In setting up the Equallogic, I ran the initial install script, it found the uninitialized drive then initialized it, then it started to run the rest of the script. It error'd out, I tried to run it...
View ArticleToo many snapshots generated
Hi,We have 2 volumes which are limited to keep a maximum of 2 snapshots, however these go up to 8 or 9 snapshots. We can see the 2 scheduled snapshots but also the other snapshots taken at various...
View ArticleRe-thinning Volumes
Hi,We have 3 volumes on our file server which are directly connected to the SAN using iSCSI Initiator. We have changed these to thin provisioned. The file server is running Windows server 2012.We have...
View ArticleHow to modify management network in production environnement ?
My PS4100 use actually 192.168.127.0/24 management network. I want to use 192.168.128.0/24.How to do that without interrupt production ?PS4100 are in a datacenter and I would do that remotely. Is it...
View ArticleRandom files created
I have a Equalogic PS4100. It has a LUN that is passed by ISCSI to a file server. It has >14TB of medical image files on it. A large chunk of files appears to be corrupted. The file extension has...
View ArticleMove Volume from One Group to Another
Is there a way to manually move a volume from one storage group to another? I have a few volumes in a storage group that I need to move to a new storage group with a new array so that I don't have to...
View ArticleEqualLogic SMP Storage Provider support for SCVMM 2016
Hi thereI'd like to get a little more information surrounding the SMP provider that comes shipped with HIT Kit 5.0, specifically, whether this will work with SCVMM 2016.We can see in the documentation...
View ArticleHow do I Uninitialize the PS4210
In setting up the Equallogic, I ran the initial install script, it found the uninitialized drive then initialized it, then it started to run the rest of the script. It error'd out, I tried to run it...
View ArticleRe-thinning Volumes
Hi,We have 3 volumes on our file server which are directly connected to the SAN using iSCSI Initiator. We have changed these to thin provisioned. The file server is running Windows server 2012.We have...
View ArticleToo many snapshots generated
Hi,We have 2 volumes which are limited to keep a maximum of 2 snapshots, however these go up to 8 or 9 snapshots. We can see the 2 scheduled snapshots but also the other snapshots taken at various...
View ArticleNew PS4210X in a group with 2 x 4100x devices
Hiya,We currently have a group that has 2 x PS6000x and 2 x PS4100x devices in a single pool.We're looking to retire the two PS6000's and buy in a single device to take over the role of these two...
View ArticleVSM support for vSphere 6.5?
Now that vSphere 6.5 is out, is there an ETA on an updated VSM that is supported/compatible with it?It seems that we have to wait to upgrade till then since we're using VVOLs. :)
View ArticlePS6100 raid 10 nospares to RAID 6 - still no hot spares
I have a PS6100 that was configured RAID10-nospares. I was able to run "raid-policy raid6" and it converted to RAID6, but there are still 0 hot spares.There is no data on the array so I can just reset...
View Article