Is VSM 4.6.0 supported on vSphere 6.5?
I understand MEM 1.4 is fully supported on vSphere 6.5 (confirmed by Donald in an earlier thread). Â Does the same apply to VSM 4.6.0?Thanks.
View ArticleMigrating Volumes to second EqualLogic group
Hi.I have a query regarding the volumes to be migrated to another storage group. We currently have 4 EqualLogic devices (2 x PS6000 , 2 x PS4100) in one Storage Group. We have to replace the PS 6000...
View ArticleMonitoring VMs in SANHQ
I was looking at the I/O section for my group. I see that there is a section for VMs there. How do I go about adding VMs to this so SANHQ can monitor them? Very new to use SANHQ. Thanks!
View ArticlePS6100 raid 10 nospares to RAID 6 - still no hot spares
I have a PS6100 that was configured RAID10-nospares. I was able to run "raid-policy raid6" and it converted to RAID6, but there are still 0 hot spares.There is no data on the array so I can just reset...
View ArticleVSM support for vSphere 6.5?
Now that vSphere 6.5 is out, is there an ETA on an updated VSM that is supported/compatible with it?It seems that we have to wait to upgrade till then since we're using VVOLs. :)
View ArticleIs VSM 4.6.0 supported on vSphere 6.5?
I understand MEM 1.4 is fully supported on vSphere 6.5 (confirmed by Donald in an earlier thread). Â Does the same apply to VSM 4.6.0?Thanks.
View ArticleProblems with Auto-Snapshot-Manager after installation of Monthly Rollup KB...
Hello,we have a EqualLogic PS4110VX that is the storage for a Windows 2012 R2 Hyper-V cluster. Since the last August 2017 Quality Rollup KB 4034681 we noticed the EQL snap through ASM were failing.We...
View ArticleIs VSM 4.6.0 supported on vSphere 6.5?
I understand MEM 1.4 is fully supported on vSphere 6.5 (confirmed by Donald in an earlier thread). Â Does the same apply to VSM 4.6.0?Thanks.
View ArticleVSM support for vSphere 6.5?
Now that vSphere 6.5 is out, is there an ETA on an updated VSM that is supported/compatible with it?It seems that we have to wait to upgrade till then since we're using VVOLs. :)
View ArticleToo many snapshots generated
Hi,We have 2 volumes which are limited to keep a maximum of 2 snapshots, however these go up to 8 or 9 snapshots. We can see the 2 scheduled snapshots but also the other snapshots taken at various...
View ArticleEqualLogic PS4000XV out of warranty - We need to change hard disk
HDD crashed: 15000 rpm, 600 GB, 3.5", SAS 6 Gb/s, buffer 16 MB.New HDD: 15000 rpm, 600 GB, 3,5", SAS 12Gb/s, buffer 256 MB.Are there any compatibility issues? And if the new HDD had a buffer of 128...
View ArticleRe-thinning Volumes
Hi,We have 3 volumes on our file server which are directly connected to the SAN using iSCSI Initiator. We have changed these to thin provisioned. The file server is running Windows server 2012.We have...
View ArticleEqualLogic SMP Storage Provider support for SCVMM 2016
Hi thereI'd like to get a little more information surrounding the SMP provider that comes shipped with HIT Kit 5.0, specifically, whether this will work with SCVMM 2016.We can see in the documentation...
View ArticleAny reason why I can't use the CLI 'mv' command to move an...
Any reason why I can't use the CLI 'mv' command to move an existing shared folder to a new location within the volume and attach a new share to the folder?D
View ArticleController replacement firmware upgrade
Hi allI have a ps4100 and one of the controllers went faultyI have sourced a replacement one problem is it's running firmware v5.2.2 and the active controller is running v7.1.2What process do I need to...
View ArticlePower Cooling Module 1 Fan 2 Speed 0 - PS6210
Setting up a new PS6210 array last night. Powered everything on and went home before configuring anything. Came in this morning and Fans blaring. Fan Speed = 0 for one fan (Mod 1 Fan2). Time to contact...
View ArticleHow to migrate Equallogic volumes to VxRail
I have an Equallogic PS4000 with a number of volumes that we use to store unstructured data (docs, worksheets etc.) and we currently access them via iSCSI from a Windows 2008 virtual server (VMware).Is...
View ArticleClik here to view.
Configure MPIO settings missing from Remote Setup Wizard
My environment is Microsoft Hyper-V Server 2012 R2 and HIT Kit 4.8.During install of the HIT Kit I selected all options but appears that ASM is missing.The Remote Support Wizard is missing the link...
View Article